Cam-A-Line Dowel Guide

Woodpeckers Cam-A-Line Dowel Guide combines variable spacing, precision-engraved centerlines, a robust fence and a versatile stop system to give you the mostcomplete dowelling jig on the market, Unlike other dowelling jigs, you're not limited tocertain dimension between pins and you don't have to try to remember which bushingsyou used., Just adjust the spacing to your material and go. You have your choice of 4different quide bushing sizes in both inch and metric. You can get Cam-A-Line with justone size, or get the Deluxe set, which includes all 4 sizes, extensions for the stop and awall-mountable Rack-lt to keep everything right in plain sight and ready to go to work.

Butt Joints, T-Joints, Miter Joints and Edge Joints on Any Stock Thickness or Size!

• Cam-A-ine uses a sliding cam system to maintain even spading between 3 dillguide bushings.you can space the bushings as cose as 3/4"(20 mm) centerto-center orspread them out up to 1-3/4"(44mm) centerto-center. This spacing range lets you have an evenly spaced three-dowel aray on a workpiece from 2-1/4" wide up to 5-12wide. You can go narrower than 2-1/4" by using only 2 of the guide bushings and you can go wider than 5-1/2" by using groups of pins.
• The easiest way to use Cam-A-Line utilizes the engraved centerine,just damp your two boards together exactly where you want them. stike a ine acros the joint. AlionCam-A-lines engraved centerine with the marks on each piece and dril your joint. The holes wiline up perfectly and create a jointhat rivals loose tenon or mortise andtenon joints for strenath and durability, You can use the same process for miter ioints, too.
• When you have stacks of similar joints to make.the stop system speeds things up, compared to using a centerline. Once your stop is set, it provides a quick physicalreference to locate your work, eiminating aligning the ig to a pendl manrk.You can quickly re-indexthe stop on the other end of the ig to dil the miror image on yourjoining piece.
• Using dowels in edge-glued panels can save hours of hand planing and sanding. The dowels keep the top surface ofyour panel flat even whenthe sections have a litle bit oftwist or bow. The extension rods for the stop system let you set the spacing between dowel pins wherever you want it.
• Like all Wodpeckers products,the Cam-A-line Dowel Guide is precisely machined and carefuly inspected right here in our Strongsvile, Ohio, facityjust south of Cleveland.

SPECIFICATIONS/FAQ'S

Q: What is the size of the Rack-It? 
A: It is 6” wide, 2” tall, and 4” deep. 

Q: Are there other rods that are compatible with the Cam-A-Line?
A: Multi-Function Router Base rods are compatible. Auto Line Drill Guide rods are NOT compatible. The Cam-A-Line uses ⅜” diameter rods and the Auto Line Drill Guide uses 5/16” diameter rods. 

Q: How does the Cam-A-Line function with narrow stock? 
A: When using narrow stock, you must reset the stop when switching to the mating piece. This will avoid any difference in placement. 

Q: Where do I store the extension rods? 
A: Extension rods are stored on the pegs on the back face of the Rack-It.